VLX 80 Awning Window

VLX 80 Awning Window in Thousand Oaks, CA | Hale Windows Thousand Oaks

The VLX 80 Awning Window is a top-hinged aluminum window that opens outward from the bottom, letting you run ventilation even when Thousand Oaks gets one of its occasional light rains. We install this window throughout Thousand Oaks as an authorized ViewLux installation partner, and we’ve seen it perform beautifully in everything from mid-century ranchers off Lynn Road to new builds in the Lang Ranch area. Hinged at the top and operated by a smooth crank mechanism, the sash presses firmly against the frame weatherstripping when closed, which is what gives the VLX 80 its impressive air-sealing numbers. If you’re researching this window, call us at (805) 309-1848 and we’ll walk you through pricing, lead times, and what to expect from installation.

Call (805) 309-1848

Product Overview – VLX 80 Awning Window

The VLX 80 is engineered around a simple idea: an aluminum frame doesn’t have to feel cold or industrial. The profile is slim enough to maximize glass area without sacrificing strength, and the thermal break running through the frame separates the interior and exterior aluminum surfaces so heat doesn’t conduct straight through the metal. For homeowners in Thousand Oaks, that matters more than most people realize. Our summer heat comes hard in August and September, and a window that stops heat transfer at the frame level keeps rooms measurably cooler. The top-hinged design means you can leave the window open a few inches during a drizzle without water pooling on the sill. That’s a practical benefit our clients in the Conejo Valley genuinely use, especially in bedrooms and kitchens where they want fresh air but don’t want to babysit a window when the weather shifts.

Architecturally, awning windows work well when paired with fixed picture windows. They sit lower or higher in the opening and handle the ventilation while the picture window does the view. We’ve also installed VLX 80 units above kitchen sinks, in bathrooms, and in hallways where a side-to-side slider would be awkward to operate. The crank mechanism opens the sash smoothly and locks it in place, so there’s no lifting or sliding to fight gravity. And because the sash closes against the frame with positive pressure, air leakage is much lower than a typical sliding window. When you combine that with the thermal break and good glass, you get a window that genuinely holds its own against the heat and noise of Thousand Oaks neighborhoods like Newbury Park and Westlake.

Technical Specifications

Numbers tell part of the story, so here are the VLX 80’s key dimensions and options. The frame wall thickness measures 0.079 inches, which is substantial for an aluminum profile and gives installers a solid anchoring surface at every connection point. The visible profile width is 1.97 inches, which keeps sightlines trim without making the frame feel flimsy. That width also gives the weatherstripping channel enough depth to create an effective compression seal when the sash closes.

• Wall thickness: 0.079 inches (extruded aluminum, consistent along the full profile length)
• Profile width: 1.97 inches (slim sightline, full thermal break inside the extrusion)
• Glass options: Clear, Frosted, Low-E, Tempered, Laminated
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Fixed Screen, Retractable Screen
• Performance standards: NFRC-rated for energy performance; AAMA 2400/2410 installation compliance; AAMA 812 foam sealant at all perimeter joints

Performance Features

Thermal Efficiency

The thermal break inside the VLX 80 frame is a non-conductive barrier that interrupts heat flow through the aluminum. In Thousand Oaks, where July and August afternoons routinely push past 90 degrees, that break is what keeps the interior frame from feeling hot to the touch. The window carries an NFRC energy performance rating, so you can compare real U-factor and Solar Heat Gain numbers rather than trusting marketing language.

Acoustic Performance

If you live near the 101, traffic noise is a fact of life. The VLX 80’s compression seal, combined with the option for thicker laminated glass, cuts a meaningful amount of road and neighborhood noise. Laminated glass has an interlayer that dampens sound transmission significantly more than standard annealed glass, which is why we recommend it for any room facing a busy Thousand Oaks street.

Airtightness & Weather Seal

The top-hinged design provides a mechanical advantage most sliders can’t match: the crank pulls the sash into the frame instead of just sliding alongside it. That positive pressure compresses the weatherstripping evenly around the full perimeter. The result is a window that holds conditioned air inside when it’s closed, which directly affects how hard your HVAC system works in a Thousand Oaks summer.

Waterproofing

Every VLX 80 we install in Thousand Oaks gets an AAMA 812 low-expansion foam sealant treatment at all perimeter joints. That foam expands to fill gaps between the window frame and the rough opening, blocking water and air paths that ordinary caulk misses. Combined with the window’s integrated drainage channels, this is what keeps wall cavities dry during our winter rain season.

Wind Resistance

The VLX 80 is wind-load rated appropriate for Southern California building requirements. For Thousand Oaks homes near open hillsides or canyon mouths where gusts come hard, the aluminum extrusion’s 0.079-inch wall thickness gives the frame the rigidity needed to stay square under load. The compression seal also helps the window resist air infiltration during high-wind events.

Security & Hardware

The crank mechanism is not just convenient; it also means the window can’t be forced open from outside without destroying the mechanism. The multi-point locking hardware sits inside the frame and engages the sash at multiple points, making the VLX 80 a poor target for opportunistic entry. For added protection, tempered or laminated glass options resist breaking far better than standard clear glass.

Color & Glass Options

Six finish options mean the VLX 80 fits nearly any Thousand Oaks home style. Premium Black gives a sharp, contemporary contrast on stucco or white siding and reads especially well on modern farmhouse exteriors. Pure White is the safe, adaptable choice for traditional interiors and exteriors, disappearing into the wall so the glass and view do the talking. Anodized Silver has a raw aluminum look that works with industrial or minimalist designs. Bronze pairs well with earth-toned stucco and ranch-style homes common in the older Conejo Valley neighborhoods. Champagne is a warm metallic that softens the look of metal framing. Teak Wood offers a woodgrain texture without the maintenance of real wood, which matters in our dry climate where wood frames crack and fade.

Glass selection depends on where the window lives. Clear is the standard for unobstructed views. Frosted belongs in bathrooms or side yards where privacy is worth more than views. Low-E reflects infrared heat back outward during summer and helps retain warmth in winter, a must for any Thousand Oaks room with direct afternoon sun. Tempered glass shatters into small, less dangerous pieces and is code-required in certain locations like windows near doors or low to the floor. Laminated glass holds together when broken, adds acoustic dampening, and offers impact resistance for high-wind or security applications.

Installation by Hale Windows Thousand Oaks in Thousand Oaks

Here’s the part most web pages gloss over: a great window installed wrong performs like a terrible window. The VLX 80 is designed to be installed to AAMA standards, and we hold our crews to those exact standards on every project in Thousand Oaks. Our process starts with a pre-installation inspection of the rough opening. We check for water damage, rot, or out-of-square openings that need correcting before the window goes in. If the opening isn’t right, we tell you and fix it first. We don’t shim-and-pray.

During installation, we set every VLX 80 level, plumb, and square. A window that’s even slightly racked won’t seat properly against its weatherstripping, which means leaks, drafts, and a crank mechanism that binds. After anchoring the frame, we apply AAMA 812 low-expansion foam sealant around the entire perimeter. This closes the gap between the window frame and the rough opening that ordinary caulk can’t address. The foam also provides an additional layer of sound and air sealing that helps the window perform up to its rating. We follow AAMA 2400 and 2410 installation standard practices, which cover everything from flashing methods to anchoring requirements.

Once the window is secure, we run a water test around the exterior to verify there are no intrusion points, then clean up the work area completely. All installation work by Hale Windows Thousand Oaks is done in a way that preserves the complete ViewLux manufacturer warranty. Improper installation voids manufacturer warranties, which is exactly why buying from an authorized installation partner matters. If something goes wrong with your VLX 80 down the road, you need an installer who did it right and a manufacturer who stands behind the product.

Frequently Asked Questions – VLX 80 Awning Window

Get a Quote – VLX 80 Awning Window in Thousand Oaks

If you’re ready to price the VLX 80 for your Thousand Oaks home, call Hale Windows Thousand Oaks at (805) 309-1848. We’ll schedule a free on-site measurement, review glass and finish options, and give you a fixed, written quote with no surprises. Thousands of Conejo Valley homeowners have worked with us for their window needs, and our workmanship is backed so you can buy with confidence.

Written by the team at Hale Windows Thousand Oaks, authorized ViewLux installation partner serving Thousand Oaks, CA and surrounding communities.